PP40006 : 400 GPH, Aquaponics, Hydroponics, Fresh or Salt Aquarium Pump - 25W, 6' Cord

PP40006 : 400 GPH, Aquaponics, Hydroponics, Fresh or Salt Aquarium Pump - 25W, 6' Cord

• PonicsPumps Sells 7 pump sizes. Click on "PonicPumps" at the top of this page to see them all.
• FLOW RATES: 396 Gallons Per Hour (GPH) @ 0' Lift; 370 GPH @ 1' Lift; 363 GPH @ 2' Lift; 343 GPH @ 3' Lift; 306 GPH @ 4' Lift; 264 GPH @ 5' Lift; 221 GPH @ 6' Lift; 132 GPH @ 7' Lift Max Lift - 8' 2".
• DIMENSIONS: 3.94" x 2.72" x 3.39".
• 6 FOOT QUALITY CORD: Many pump manufacturers use an inferior quality cord, our highest quality (SJTW) Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
• UL APPROVED: The file number is E329601.
• EPOXY RESIN ENCASEMENT of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
• NEODYMIUM IRON BORON (NdFeB) MAGNETS are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency.
• EASY CLEAN: No tools required to disassemble and clean filter/impeller.
• WATER-LUBRICATED HYDROGENATED NITRILE (HNBR) BEARINGS are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.
• 25 WATTS - 120VAC - 60Hz
• 3 OUTLET ADAPTORS : For 1/2", 5/8" and 3/4" tubing.
• SALT OR FRESH WATER READY!
• ADJUSTABLE INPUT FLOW RATE
• OIL FREE, NO EXPOSED COPPER Safe for fish!
• POLISHED ALUMINUM OXIDE CERAMIC IMPELLER SHAFT insures long pump life. This non-corrodible ceramic shaft is 3 times as hard as stainless steel.
• NO SEAL TO FAIL! Uses wet-rotor design, so no seal to fail that would damage the pump motor.
• LIMITED WARRANTY: 1 Year, only when sold by NicheNOVA.

HOW TO CHOOSE A HYDROPONIC, AQUAPONIC, ALGAPONIC, AQUARIUM, POND OR FOUNTAIN PUMP First remember:
 ? "Maximum Flow Rate" is meaningless because it is at ZERO head.
 ? "Maximum Head/Lift" is meaningless because the flow at that height is only a trickle.

You need an affordable quality pump with the desired flow at your required head and lowest wattage.

Step 1: Determining Desired Flow Rate
Most ponics systems flow through a single loop allowing a single pump. A flow

List Price: $ 54.99 Price: $ 25.99

Find More Salt Water Fish Tank Products
Read more...