PP29105 : 291 GPH, Underwater, Hydroponics, Aquarium, Aquaponics Pump - 16W, 5' Cord

PP29105 : 291 GPH, Underwater, Hydroponics, Aquarium, Aquaponics Pump - 16W, 5' Cord

• PonicsPumps Sells 7 pump sizes. Click on "PonicPumps" at the top of this page to see them all.
• FLOW RATES: 291 Gallons Per Hour (GPH) @ 0' Lift; 271 GPH @ 1' Lift; 251 GPH @ 2' Lift; 218 GPH @ 3' Lift; 172 GPH @ 4' Lift; 120 GPH @ 5' Lift; 26 GPH @ 6' Lift; Max Lift - 6' 3".
• DIMENSIONS: 3.50" x 2.80" x 3.27".
• 5 FOOT QUALITY CORD: Many pump manufacturers use an inferior quality cord, our highest quality (SJTW) Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
• UL APPROVED: The file number is E329601.
• EPOXY RESIN ENCASEMENT of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
• NEODYM IUM IRON BORON (NdFeB) MAGNETS are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency.
• EASY CLEAN: No tools required to disassemble and clean filter/impeller.
• WATER-LUBRICATED HYDROGENATED NITRILE (HNBR) BEARINGS are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.
• 16 WATTS - 120VAC - 60Hz
• 3 OUTLET ADAPTORS : For 1/2", 5/8" and 3/4" tubing.
• SALT OR FRESH WATER READY!
• ADJUSTABLE INPUT FLOW RATE
• OIL FREE, NO EXPOSED COPPER Safe for fish!
• POLISHED ALUMINUM OXIDE CERAMIC IMPELLER SHAFT insures long pump life. This non-corrodible ceramic shaft is 3 times as hard as stainless steel.
• NO SEAL TO FAIL! Uses wet-rotor design, so no seal to fail that would damage the pump motor.
• LIMITED WARRANTY: 1 Year, only when sold by NicheNOVA.

HOW TO CHOOSE A HYDROPONIC, AQUAPONIC, ALGAPONIC, AQUARIUM, POND OR FOUNTAIN PUMP First remember:
 - "Maximum Flow Rate" is meaningless because it is at ZERO lift.
 - "Maximum Head/Lift" is meaningless because the flow at that height is only a trickle.

You need to choose an affordable quality pump that produces the "desired flow at your required lift" at the lowest wattage.

Step 1: Determining Desired Flow Rate
Hydroponic Systems - typically flow through a single

List Price: $ 41.99 Price: $ 19.99

Find More Small Fish Tanks Products
Read more... http://aquapower.hobbiesandcrafts.net/tanks-to-buy/pp29105-291-gph-underwater-hydroponics-aquarium-aquaponics-pump-16w-5-cord/